Shenzhen Scott Electronics & Technology Co., Ltd.
Main products:led strip,led bulb lamp,light modulator
Products
Contact Us
  • Contact Person : Ms. Wang Xiaoli
  • Company Name : Shenzhen Scott Electronics & Technology Co., Ltd.
  • Tel : 86--755-27975602
  • Fax : 86-755--27975602
  • Address : Guangdong,shenzhen,Unit 04, 7/F, Bright Way Tower, No. 33, Mong Kok Road, KL
  • Country/Region : China
  • Zip : 518110

35W AC/DC switch power supply

35W AC/DC switch power supply
Product Detailed
35W AC/DC switch power supply 1. CE, Rohs approved 2. Low price

35W AC/DC switch power supplyCE, Rohs approved

size: 129*98*38mm or 84*58*38mm

ModelSpecificationS-35-5S-35-12S-35-15S-35-24
DC output voltage5V12V15V24V
Output voltage error(Note2)

±2%

±1%±1%±1%
Rated output current

7A

3A2.4A1.5A
Output current rage

0-7A

0-3A0-2.4A0-1.5A
Wave and noise(Note3)75mVp-p100mVp-p100mVp-p100mVp-p
Inlet stability(Note4)±0.5%±0.5%±0.5%±0.5%
Load stablity (Note5)±1%±0.5%±0.5%±0.5%
DC output power35W36W36W36W
Efficiency70%76%78%78%
Adjustable range for DC voltage+10,-5%+10%+10%+10%
AC input voltage range86-132VAC/170-264VACSelected by switch47-63Hz;240-370VDC
Input current0.5A/115V 0.25A/230A
AC INnrush current

Cold-start current15A/115V 30A/230V

Leakage current<0.5mA/240VAC
Overload proctection105%-150%Type:Foldback:current limiting reset:auto recovery
Over-voltage protection 
High-temperature protection 
Temperature coefficient±0.03%/°C(0-50°C)
Setup rise hold up time200ms,100ms,30ms
Vibration10-500HZ,2G 10min,/1cycle,Period for60min,Each axes
Withstand voltageInput and output internal;1.5KVAC,Input and enclosure;1.5KVAC,Output and enclosure;0.5KVAC
Isolation resistanceInput and output internal:Input and enclosure,Output and enclosure;500VDC/100MΩ
Working temperature and humidity-10°C~+60°C(Refer to output derating curve),20%~90%RH
Store temperature and humidity-20°C~+85°C.10%~95%RH
Overall dimension129×98×38mm
Weight0.4Kgs
Safety standardsMeet UL 1012 requirement(Not apply for the mark)
EMC standardsMeet FCC part15J Conduction classB
Note;1.The testing condition for the paramenter above is;230VAC input,rated load,25°C70% RH.Humidity.2.Error.include the setting error,line stability and load stability.(Note:5).3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.5.Load stability test:the load is from 0% to 100%.

35W AC/DC switch power supply



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.